MODEL No. 101 Galvanized Snaplock Pipe
No. 101 Snaplock Pipe - fabricated from 
1.37 KBs - 2005-09-21

MODEL No. 105 ALUMINUM FLEXIBLE PIPE
No. 105 Flexell Pipe - available in diameters 3" - 10", 8-Ft. long sections. Fabricated from .005" thi
859 Bytes - 2005-09-22

MODEL No. 111 Adjustable 90 Degree Elbow
No. 111 Adjustable 90º Elbow - fabricated&
1.37 KBs - 2005-09-22

MODEL No. 121 Adjustable 45 Degree Angle
No. 121 Adjustable 45º Angle - fabricated&
1.16 KBs - 2005-09-22

MODEL No. 1242 Framed Boot
No. 1242 Framed Boot - fabricated from 30ga. ga
1.09 KBs - 2005-11-14

MODEL No. 1242-FL Framed Boot
No. 1242-FL Framed Boot - fabricated from 30ga.
1.22 KBs - 2005-11-14

MODEL No. 1243-FL Angle Floor Boot
No. 1243-FL Angle Floor Boot - fabricated from
1.06 KBs - 2005-11-14

MODEL No. 1244-FL Center End Floor Boot
No. 1244-FL Center End Floor Boot - fabricated
1.06 KBs - 2005-11-14

MODEL No. 1250 Mounting Bracket, 24 Gauge
No. 1250 Mounting Bracket - fabricated from 24 gauge
970 Bytes - 2005-11-22

MODEL No. 1250-16 Mounting Bracket, 24 Gauge 16" long
No. 1250-16 Mounting Bracket - fabricated from
1.2 KBs - 2005-11-22

MODEL No. 1252 Mounting Bracket, 25" Long
No. 1252 Mounting Bracket - fabricated from 26
1.17 KBs - 2005-12-15

MODEL No. 1254 Mounting Bracket, 25" Long
No. 1254 Mounting Bracket - fabricated from 26
1.04 KBs - 2005-12-15

Model No. 1260 Mounting Angle
No. 1260 Mounting Angle - fabricated from 18 ga
1.04 KBs - 2006-01-17

MODEL No. 1269 Framed Box w/ Side Collar
No. 1269 Framed Box - fabricated from 28ga.
1.21 KBs - 2005-11-14

MODEL No. 1269-FL Framed Box w/ Side Collar
No. 1269-FL Framed Box - fabricated from 28ga.
1.23 KBs - 2005-11-14

MODEL No. 1275 Framed Box w/ Top Collar
No. 1275 Framed Box - fabricated from 30ga. gal
1.06 KBs - 2005-11-14

MODEL No. 1284 Duct Board Box w/o Flange
N. 1284 Duct Board Box w/o Flange - fabricated
1.05 KBs - 2005-11-14

MODEL No. 1288 Duct Board Box w/ Flange
No. 1288 Duct Board Box - fabricated from 30 ga
1.06 KBs - 2005-11-14

MODEL No. 1288-FL Duct Board Box with Flange
No. 1288-FL Duct Board Box - fabricated from 30
1.2 KBs - 2005-11-14

MODEL No. 1288-FLG Duct Board Box w/ Flange and Therma Seal Gasket
No. 1288-FLG Duct Board Box - fabricated from 3
1.37 KBs - 2005-11-14

MODEL No. 1292 Duct Board Box w/ Flange 11" Tall
No. 1292 Duct Board Box w/ Flange - fabricated
1.18 KBs - 2005-11-14

MODEL No. 1292-FL Duct Board Box w/ Flange, 11" Tall
No. 1292-FL Duct Board Box w/ Flange - fabricat
1.19 KBs - 2005-11-14

MODEL No. 1298 Slant Top Duct Board Box with Flange
No. 1298 Slant Top Duct Board Box w/ Flange -&n
1.21 KBs - 2005-11-14

MODEL No. 1298-FL Slant Top Duct Board Box with Flange
No. 1298-FL Slant Top Duct Board Box w/ Flange
1.23 KBs - 2005-11-14

MODEL No. 1480 Rectangle-to-Round Transition, R-4 Insulation
No. 1480 Transition Rectangle / Round - fabrica
1.24 KBs - 2005-11-18

MODEL No. 1480-FL Rectangle-to-Round Transition, R-6 Insulation
No. 1480-FL Transition Rectangle / Round - fabr
1.26 KBs - 2005-11-18

MODEL No. 1565-CRD Ceiling Radiation Damper Box, Side Collar
No. 1565-CRD Ceiling Radiation Damper Box -&nbs
1.05 KBs - 2005-11-14

MODEL No. 1575 Framed Box, Silver Interior
No. 1575 Framed Box - fabricated from 30ga. gal
1.08 KBs - 2005-11-14

MODEL No. 1575-CRD Ceiling Radiation Damper Box, Top Collar
No. 1575-CRD Ceiling Radiation Damper Box -&nbs
1.05 KBs - 2005-11-14

MODEL No. 1575-G Framed Box w/ Therma Seal Gasket, Silver Interior
No. 1575-G Framed Box - fabricated from 30ga.&n
1.39 KBs - 2005-11-14

MODEL No. 1580 Framed Box, Black Interior
No. 1580 Framed Box - fabricated from 30ga. gal
1.08 KBs - 2005-11-14

MODEL No. 1580-G Framed Box w/ Therma Seal Gasket, Black Interior
No. 1580-G Framed Box - fabricated from 30ga.&n
1.39 KBs - 2005-11-14

MODEL No. 1713 Trunk Line Reducer Box 1" Duct Board
No. 1713 Trunk Line Reducer Box - fabricated fr
1.03 KBs - 2005-10-28

MODEL No. 1713-FL Trunk Line Reducer Box 1½" Duct Board
No. 1713-FL Trunk Line Reducer Box - fabricated
1.05 KBs - 2005-10-28

MODEL No. 1715 Triangle Box 1" Duct Board
No. 1715 Triangle Box - fabricated from 1"
1.02 KBs - 2005-10-28

MODEL No. 1715-FL Triangle Box 1-1/2" Duct Board
No. 1715-FL Triangle Box - fabricated from 1&fr
1.03 KBs - 2005-12-09

MODEL No. 175-X Round Damper Sleeve with Damper Handle Standoff
No. 175-X Round Damper Sleeve with Damper Handl
1.22 KBs - 2005-09-22

MODEL No. 2001 Slot Diffuser Plenum
No. 2001 Slot Diffuser Plenum - fabricated from
1.18 KBs - 2005-11-14

MODEL No. 201 Wallstack Duct
No. 201 Wallstack Duct - fabricated from galvan
1.05 KBs - 2005-12-15

MODEL No. 223 Stackhead
No. 223 Stackhead - fabricated from galvanized
898 Bytes - 2005-12-15

MODEL No. 230 Long Way Elbow, 90 Degree
No. 230 90º Long Way Elbow - fabricated fr
1.04 KBs - 2005-09-22

MODEL No. 231 Straight Boot
No. 231 Straight Boot - fabricated from 30ga. g
1.21 KBs - 2005-09-22

MODEL No. 232 Range Hood Transition
No. 232 Range Hood Transition - fabricated from
1.01 KBs - 2005-09-22

MODEL No. 233 90º Angle Boot
No. 233 90º Angle Boot - fabricated from 3
1.05 KBs - 2005-12-15

MODEL No. 234 Center End Boot
No. 234 Center End Boot - fabricated from 30ga.
897 Bytes - 2005-09-23

MODEL No. 235 Long Way Elbow, 45 Degree
No. 235 45º Long Way Elbow - fabricated fr
1.03 KBs - 2005-09-23

MODEL No. 236 Adjustable Offset Boot
No. 236 Adjustable Offset Boot - fabricated fro
903 Bytes - 2005-09-23

MODEL No. 240 Short Way Elbow, 90 Degree
No. 240 90º Short Way Elbow - fabricated f
1.05 KBs - 2005-09-23

MODEL No. 241 Straight Boot
No. 241 Straight Boot - fabricated from 30ga. g
897 Bytes - 2005-11-02

MODEL No. 242 Framed Boot
No. 242 Framed Boot - fabricated from 30ga.
1.05 KBs - 2005-11-02

MODEL No. 243 90º Angle Boot
No. 243 90º Angle Boot - fabricated from 3
901 Bytes - 2005-11-02

MODEL No. 243-F 90º Angle Boot with Drywall Flange
No. 243-F 90º Angle Boot w/ Drywall Flange
1.21 KBs - 2005-11-14

MODEL No. 244 Center End Boot
No. 244 Center End Boot - Fabricated from 30ga.
891 Bytes - 2005-11-14

MODEL No. 244-F Center End Boot with Drywall Flange
No. 244-F Center End Boot w/ Drywall Flange -&n
1.2 KBs - 2005-11-14

MODEL No. 245 Short Way Elbow, 45 Degree
No. 245 45º Short Way Elbow - fabricated f
1.04 KBs - 2005-09-23

MODEL No. 246 Adjustable Boot
No. 246 Adjustable Boot - Fabricated from 30ga.
1.02 KBs - 2005-09-23

MODEL No. 261 Tab Collar-3" Long
No. 261 Tab Collar - fabricated from 30ga. galv
1.05 KBs - 2005-10-28

MODEL No. 261-L Tab Collar - 6" Long
No. 261-L Tab Collar - fabricated from 30ga. ga
1.04 KBs - 2005-11-02

MODEL No. 265 REDUCER / INCREASER
No. 265 Tapered Reducer - fabricated 
1.02 KBs - 2005-09-23

MODEL No. 265 Tapered Reducer
No. 265 Tapered Reducer - fabricated 
1.01 KBs - 2006-01-17

MODEL No. 266 FLAT REDUCER
No. 266 Flat Reducer - fabricated from 
1005 Bytes - 2005-09-26

MODEL No. 269 Register Box
No. 269 Register Box - fabricated from 30ga. ga
1.05 KBs - 2005-11-14

MODEL No. 273 End Cap
No. 273 Round End Cap - fabricated from 26ga.&n
867 Bytes - 2005-09-26

MODEL No. 275 Damper
No. 275 Manual Volume Damper - fabricated from&
1.04 KBs - 2005-09-26

MODEL No. 276 IN-LINE WYE
No. 276 In-Line Wye - fabricated from 
1.2 KBs - 2005-09-26

MODEL No. 277 BULL NOSE WYE
No. 277 Bull Nose Wye - fabricated from 
1.2 KBs - 2005-09-26

MODEL No. 278 ADJUSTABLE WYE
No. 278 Adjustable Wye - fabricated from 
1.33 KBs - 2005-09-26

MODEL No. 279 ADJUSTABLE WYE 2-WAY
No. 279 2-Way Adjustable Wye - fabricated
1.2 KBs - 2005-09-26

MODEL No. 301 Plenum
No. 301 Plenum - fabricated from galvanized ste
1.2 KBs - 2005-09-26

MODEL No. 305 TAKEOFF from ROUND PIPE
No. 305 Round Takeoff - fabricated from
1.37 KBs - 2005-09-26

MODEL No. 306 ADJUSTABLE TAKEOFF
No. 306 Adjustable Takeoff - fabricated from
1.41 KBs - 2005-09-26

MODEL No. 307 SADDLE TAKEOFF
No. 307 Saddle Takeoff - fabricated from
1.21 KBs - 2005-09-26

MODEL No. 308 TOP TAKEOFF
No. 308 Top Takeoff - fabricated from
1.38 KBs - 2005-09-26

MODEL No. 309 SIDE TAKEOFF
No. 309 Side Takeoff - fabricated from
1.38 KBs - 2005-09-26

MODEL No. 310 Saddle Collar with Therma Seal Gasket
No. 310 Takeoff Collar - fabricated from galvan
1.16 KBs - 2005-11-02

MODEL No. 312 Saddle Collar with Scoop, Therma Seal Gasket
No. 312 Takeoff Collar w/ Scoop - fabricated fr
1.04 KBs - 2005-11-02

MODEL No. 314 Saddle Collar with Damper, Therma Seal Gasket
No. 314 Takeoff Collar w/ Damper - fabricated f
1.19 KBs - 2005-11-02

MODEL No. 316 Saddle Collarwith Scoop Damper,Therma Seal Gasket
No. 316 Takeoff Collar w/ Scoop & Damper -
1.2 KBs - 2005-11-02

MODEL No. 332 Vent Top w/ Wind Band
No. 332 Vent Top - fabricated from galvanized s
902 Bytes - 2005-11-14

MODEL No. 334 Vent Top
No. 334 Vent Top - fabricated from 28ga. galvan
901 Bytes - 2005-11-14

MODEL No. 336 Roof Flashing
No. 336 Roof Flashing - fabricated from galvani
1.05 KBs - 2005-11-14

MODEL No. 339 Storm Collar
No. 339 Storm Collar - fabricated from galvaniz
897 Bytes - 2005-11-14

MODEL No. 341 Roof Jack for Flat Roof
No. 341 Roof Jack - fabricated from 28ga. galva
1.04 KBs - 2005-11-14

MODEL No. 341-P Roof Jack for Pitched Roof
No. 341-P Roof Jack - fabricated from 28ga. gal
1.18 KBs - 2005-11-14

MODEL No. 349 Sidewall Vent
No. 349 Side Wall Vent - fabricated from galvan
1.06 KBs - 2005-11-14

MODEL No. 350 Roof Cap with Round Collar
No. 350 Roof Cap - fabricated from 28ga. galvan
1.21 KBs - 2005-11-14

MODEL No. 350-D Roof Cap with Round Collar & Gravity Damper
No. 350-D Roof Cap - fabricated from 28ga. galv
1.21 KBs - 2005-11-14

MODEL No. 350-R Roof Cap with Rectangular Hole
No. 350-R Roof Cap - fabricated from 28ga. galv
1.06 KBs - 2005-09-27

MODEL No. 350-RD Roof Cap with Rectangular Hole & Damper
No. 350-RD Roof Cap - fabricated from 28ga. gal
1.23 KBs - 2005-09-27

MODEL No. 353 Roof Jack for Refigerant Lines
< No. 353 Roof Jack - fabricated from galvani
1.06 KBs - 2005-09-27

MODEL No. 357 Blind Box, 12" High
No. 357 Blind Box - fabricated from 28ga. galva
855 Bytes - 2005-11-14

MODEL No. 360 Aluminum Ventilator with Screen
No. 360 Aluminum Roof Ventilator - fabricated f
884 Bytes - 2005-09-28

MODEL No. 360-D Aluminum Roof Ventilator with Damper
No. 360-D Aluminum Roof Ventilator w/ Damper -&
1.03 KBs - 2005-11-18

MODEL No. 360-DX Aluminum Ventilator with Extension & Damper
No. 360-DX Aluminum Roof Ventilator w/ Damper&n
1.18 KBs - 2005-11-18

MODEL No. 360-X Aluminum Ventilator with Extension
No. 360-X Aluminum Roof Ventilator w/ Extension
1.18 KBs - 2005-11-18

MODEL No. 412-R Flex Connector for Round Duct
No. 412-R Round Flex Connector - available in 2
1 KB - 2005-11-18

MODEL No. 450 Universal Access Door
No. 450 Universal Access Door  - fabricate
1.21 KBs - 2005-11-22

MODEL No. 465 Expand-O-Duct, 12x12
No. 465 Expand-O-Duct - fabricated from 22 ga.
1.06 KBs - 2005-11-18

MODEL No. 469 Expand-O-Dut, 16x16
No. 469 Expand-O-Duct - fabricated from 22 ga.
1.06 KBs - 2005-11-18

MODEL No. 480 Rectangle-to-Round Transition
No. 480 Transition Rectangle / Round - fabricat
1.05 KBs - 2005-11-18

MODEL No. 612 Can Stock
No. 612 Can Stock  - fabricated from 30ga.
892 Bytes - 2005-11-22

MODEL No. 616 Tab Collar
No. 616 Tab Collar - fabricated from
1.33 KBs - 2005-10-27

MODEL No. 616-D Tab Collar w/ Damper
No. 616-D Tab Collar w/ Damper - fabricated fro
1.41 KBs - 2005-10-27

MODEL No. 616-DS Tab Collar w/ Scoop and Damper
No. 616-DS Tab Collar w/ Scoop & Damper -&n
1.44 KBs - 2005-10-27

MODEL No. 616-G Tab Collar w/ Therma Seal Gasket
No. 616-G Tab Collar w/ Therma Seal Gasket -&nb
1.59 KBs - 2005-10-27

MODEL No. 619 Inside Ring
No. 619 Inside Ring - fabricated from galvanize
1.01 KBs - 2005-10-27

MODEL No. 620 Twist Lock Collar for 1" Duct Board
No. 620 Twist Lock Collar - fabricated from 30g
1.02 KBs - 2005-10-27

MODEL No. 620-FL Twist Lock Collar for 1½" Duct Board
No. 620-FL Twist Lock Collar - fabricated from
1.01 KBs - 2005-10-28

MODEL No. 622 Twist Lock Collar with Scoop for 1" Duct Board
No. 622 Twist Lock Collar w/ Scoop - fabricated
1.03 KBs - 2005-10-27

MODEL No. 622-FL Twist Lock Collar with Scoop for 1½" Duct Board
No. 622-FL Twist Lock Collar w/ Scoop - fabrica
1.02 KBs - 2005-10-28

MODEL No. 624 Twist Lock Collar with Damper for 1" Duct Board
No. 624 Twist Lock Collar w/ Damper - fabricate
1.3 KBs - 2005-10-28

MODEL No. 624-FL Twist Lock Collar with Damper for 1-1/2" Duct Board
No. 624-FL Twist Lock Collar w/ Damper - fabric
1.19 KBs - 2005-12-09

MODEL No. 626 Twist Lock Collar w/ Scoop & Damper for 1" Duct Board
No.626 Twist Lock Collar with Scoop &
1.31 KBs - 2005-10-28

MODEL No. 626-FL Twist Lock Collar with Scoop & Damper for 1½" Duct Board
No. 626-FL Twist Lock Collar w/ Scoop & Dam
1.2 KBs - 2005-10-28

MODEL No. 640 Ring Seal Collar For 1" Duct Board
No. 640 Ring Seal Collar - fabricated from galv
1.22 KBs - 2005-10-28

MODEL No. 640-FL Ring Seal Collar For 1½" Duct Board
No. 640-FL Ring Seal Collar - fabricated from g
1.23 KBs - 2005-10-28

MODEL No. 644 Ring Seal Collar with Damper For 1" Duct Board
No. 644 Ring Seal Collar w/ Damper - fabricated
1.41 KBs - 2005-10-28

MODEL No. 644-FL Ring Seal Collar with Damper For 1½" Duct Board
No. 644-FL Ring Seal Collar w/ Damper - fabrica
1.42 KBs - 2005-10-28

MODEL No. 650 Ring Seal Collar For Sheet Metal Duct
No. 650 Ring Seal Collar - fabricated from galv
1.04 KBs - 2005-11-02

MODEL No. 652 Ring Seal Collar w/ Scoop For Sheet Metal Duct
No. 652 Ring Seal Collar w/ Scoop - fabricated
1.05 KBs - 2005-11-02

MODEL No. 654 Ring Seal Collar w/ Damper For Sheet Metal Duct
No. 654 Ring Seal Collar w/ Damper - fabricated
1.21 KBs - 2005-11-02

MODEL No. 656 Ring Seal Collar with Scoop & Damper for Sheet Metal Duct
No. 656 Ring Seal Collar w/ Scoop & Damper
1.22 KBs - 2006-01-17

MODEL No. 666 Adapter
No. 666 Adapter - fabricated from galvanized st
1.2 KBs - 2005-11-14

MODEL No. 680 Flex Duct Connector Sleeve
No. 680 Flex Duct Connector Sleeve - fabricated
1.05 KBs - 2005-10-27

MODEL No. 695 Saddle Hanger for Duct Board
No. 695 Saddle Hanger for Duct Board - fabricat
902 Bytes - 2005-11-22

MODEL No. 697 Duct Board Hanger Channel
No. 697 Duct Board Hanger Channel - fabricated
1.04 KBs - 2005-11-22

MODEL No. 700-350 Dryerbox for 2x4 wall
No. 700-350 Dryer Box - fabricated from 22ga. a
1.23 KBs - 2005-11-22

MODEL No. 700-425 Dryerbox for 2x6 wall
No. 700-425 Dryer Box - fabricated from 22ga. a
1.23 KBs - 2005-11-22

MODEL No. 710 Takeoff Collar For Sheet Metal Duct
No. 710 Takeoff Collar - fabricated from galvan
1.05 KBs - 2005-11-02

MODEL No. 712 Takeoff Collar w/ Scoop For Sheet Metal Duct
No. 712 Takeoff Collar w/ Scoop - fabricated fr
1.2 KBs - 2005-11-02

MODEL No. 714 Takeoff Collar w/ Damper For Sheet Metal Duct
No. 714 Takeoff Collar w/ Damper - fabricated f
1.23 KBs - 2005-11-02

MODEL No. 716 Collar with Scoop & Damper, Therma Seal Gasket
No. 716 Takeoff Collar w/ Scoop & Damper -
1.25 KBs - 2005-11-02

MODEL No. 720 Spin-In Collar For Sheet Metal Duct
No. 720 Spin-In Collar - fabricated from galvan
911 Bytes - 2006-01-17

MODEL No. 722 Spin-In Collar w/ Scoop For Sheet Metal Duct
No. 722 Spin-In Collar w/ Scoop - fabricated fr
1.03 KBs - 2005-11-02

MODEL No. 724 Spin-In Collar w/ Damper For Sheet Metal Duct
No. 724 Spin-In Collar w/ Damper - fabricated f
1.07 KBs - 2005-11-02

MODEL No. 726 Spin-In Collar w/ Scoop & Damper For Sheet Metal Duct
No. 726 Spin-In Collar w/ Scoop & Damper -
1.07 KBs - 2005-11-02

MODEL No. 750 Drain Pan
No. 750 Drain Pan - fabricated from galvanized
1.08 KBs - 2005-11-22

MODEL No. 777 Aluminum Hanger Strap, 1"x200' Roll
No. 777 Aluminum Hanger Strap - fabricated from
1015 Bytes - 2005-11-22

MODEL No. 778 Aluminum Hanger Strap, 1"x 100' Roll
No. 778 Aluminum Hanger Strap - fabricated from
1015 Bytes - 2005-11-22

MODEL No. 792 Tying Wire
No. 792 Tying Wire - 18ga. wire supplied in 830 ft. rolls.
596 Bytes - 2005-11-22

MODEL No. 793 Angle
No. 793 Angle - fabricated from galvanized stee
1.02 KBs - 2005-11-22

MODEL No. 795 1" & 2" Duct Hanger Strap, 10' Strip
No. 795 Hanger Strap - fabricated from galvaniz
1.02 KBs - 2005-11-22

MODEL No. 797 2" Duct Hanger Strap,100' Roll
No. 797 Hanger Strap - fabricated from galvaniz
891 Bytes - 2005-11-22

MODEL No. 799 2" Duct Hanger Strap, 100' Roll
No. 799 Hanger Strap - fabricated from galvaniz
897 Bytes - 2005-11-22

MODEL No. 88 Duct Board Box w/o Flange
No. 88 Duct Board Box w/o Flange - fabricated f
1.05 KBs - 2005-11-14

MODEL No. 900 Return Air Box, 6" Deep
No. 900 Return Air Box - fabricated from 28ga.
1.03 KBs - 2005-12-15

MODEL No. 905 Return Air Box, 10" Deep
No. 905 Return Air Box - fabricated from 28ga.
1.03 KBs - 2005-12-15

MODEL No. 910 Return Air Box, 22" Deep
No. 910 Return Air Box - fabricated from 28ga.
1.03 KBs - 2005-12-15

MODEL No. 912 Return Air Box, 22" Deep
No. 912 Return Air Box - fabricated from 28ga.
1.1 KBs - 2005-12-15

MODEL No. 920 Supply Connector
No. 920 Supply Connector - fabricated from 28ga
1.19 KBs - 2005-12-15

MODEL No. 925 Supply Bushing
No. 925 Supply Bushing - fabricated from 28 gau
866 Bytes - 2005-12-15

MODEL No. 930 Damper Section, Top Only
No. 930 Damper Section - fabricated from 26 gau
889 Bytes - 2005-12-15

MODEL No. 935 Damper Section
No. 935 Damper Section - fabricated from 26 gau
1.06 KBs - 2005-12-15

MODEL No. 945 Disposable Filter
No. 945 Disposable Filter - 1" thick.
1.8 KBs - 2005-12-15

MODEL No. 950 Floor Grille
No. 950 Floor Grille - Available Sizes:  1
2.22 KBs - 2005-12-15

MODEL No. 965 Wye
No. 965 Wye - fabricated from galvanized steel.
1.01 KBs - 2005-12-15

MODEL No. 967 Wye with Back Draft Damper
No. 967 Wye - fabricated from galvanized steel.
1.05 KBs - 2005-12-15

MODEL No.175 Round Damper Sleeve
No. 175 Round Damper Sleeve - fabricated from&n
1.05 KBs - 2005-11-18

MODEL No.271 Tee
No. 271 Tee - fabricated from galvanized
1.18 KBs - 2005-12-09

MODEL No.356 Aluminum Vent Cap with Screen
No. 365 Aluminum Vent Cap with Screen - fabrica
893 Bytes - 2005-11-18

MODEL No.370 Aluminum Flashing
No. 370 Aluminum Flashing - fabricated from&nbs
847 Bytes - 2005-11-18

MODEL No.500 Adjustable Return Air Stand with Filter Rack
No. 500 Adjustable Return Air Stand  - fab
1.23 KBs - 2005-11-22

MODEL No.550 Condensing Unit Cover
No. 550 Condensing Unit Cover - fabricated from
1.03 KBs - 2005-11-22

MODEL No.560 Line Cover
No. 560 Line Cover - fabricated from galvanized
1.04 KBs - 2005-11-22

MODEL No.565 Line Cover with Cap
No. 565 Line Cover w/ Cap  - fabricated fr
1.24 KBs - 2005-11-22

No. 261-D Tab Collar w/ Damper For Sheet Metal Duct
No. 261-D Tab Collar w/ Damper - fabricated fro
1.22 KBs - 2006-01-16